Heat Flux Sensor – gSKIN®-XM

(No reviews yet) Write a Review
309.00CHF
Product:
gSKIN® XM
Detector Type:
Thermoelectric
Surface Material (Sensing Area):
Aluminum
Article Number:
A-044336
Sensing Dimensions (mm):
4.4 x 4.4 x 0.5
Heat Flux Range Min / Max [kW/m²]:
-150 / 150
Noise Equivalent Heat Flux per area [W/m²] / absolute [μW]:
0.340 / 6.6 (Experimentally evaluated values under optimal steady state conditions).
Heat Flux Resolution per area [W/m2] with gSKIN® DLOG / absolute [μW]:
0.41 / 7.9 (Guaranteed minimum heat flux resolution using the gSKIN® DLOG-4219).
Temperature Difference Resolution [μK]:
~140
Response Time (0-95%) [s]:
0.7
Min. /Avg. Sensitivity (S) [μV/(W/m²)]:
1.5 (Only a reference point).
Max. Compressive Force when clamped [kgf]:
< 2
Electrical Resistance [Ohm]:
< 20
Thermal Conductivity [W/(m*K)]:
∼1.1
Linearity with Power [±%]:
1
Operating Temperature Range Min/Max [°C]:
-50 / 150
Calibration Accuracy [±%]:
3
Calibration Temperature Range Min/Max [°C]:
-30 / 70 (Conductive heat flux calibration cohering to the ISO8301 standard with mean temperature of 22.5°C).
Flexprint Length (f) [cm]:
5
Temperature Dependence of S [%/°C]:
0.25
Homogeneity [±%]:
1 (The sensitivity increases or decreases as the temperature goes above or below 22.5°C). Position dependent signal change across sensing area.
Cable Length (c) [cm]:
100
Adding to cart… The item has been added

Product Overview

Small heat flux sensor for performing reliable measurements under controlled conditions. Available both without and with connector (at a cost of +10 CHF).

Features

  • Ultra-high resolution of thermal energies and temperature differences.
  • Low invasiveness and thickness.
  • Models with connector compatible with all gSKIN®DLOG Data Loggers.
  • All sensors with conductive heat flux calibration cohering to ISO 8301.
  • Applications: R&D, thermal optimization, energy efficiency, industrial monitoring of thermal properties.

Downloads

gSKIN® Heat Flux Sensors Datasheet

Manual

How to connect a gSKIN Sensor with a DAQ-Pro Read-Out Device

If you are interested to purchase in larger quantities, please contact shop@greenteg.com

 

Reviews

(No reviews yet) Write a Review