Our Large sized heat flux sensor for superior accuracy and responsiveness.
Available both without and with connector (at a cost of +10 CHF).
Features
- Ultra-high resolution of thermal energies and temperature differences.
- Low invasiveness and thickness.
- Models with connector compatible with all gSKIN®DLOG Data Loggers.
- All sensors with conductive heat flux calibration cohering to ISO 8301.
- Applications: R&D, thermal optimization, energy efficiency, industrial monitoring of thermal properties.
Downloads
gSKIN® Heat Flux Sensors Datasheet
How to connect a gSKIN Sensor to a DAQ-Pro Read-Out Device
If you are interested to purchase in larger quantities, please contact info@greenTEG.com
- Detector Type:
- Thermoelectric
- Product:
- gSKIN® XI
- Article Number:
- A-044628
- Heat Flux Resolution per area [W/m2] with gSKIN® DLOG / absolute [μW]:
- 0.02 / 5.7 (Guaranteed minimum heat flux resolution using the gSKIN® DLOG-4219).
- Surface Material (Sensing Area):
- Aluminum
- Sensing Dimensions (mm):
- 18.0 x 18.0 x 0.5
- Temperature Dependence of S [%/°C]:
- 0.25
- Heat Flux Range Min / Max [kW/m²]:
- -150 / 150
- Operating Temperature Range Min/Max [°C]:
- -50 / 150
- Thermal Conductivity [W/(m*K)]:
- ~1.3
- Calibration Temperature Range Min/Max [°C]:
- -30 / 70 (The sensitivity increases / decreases as the temperature goes above / below 22.5°C).
- Calibration Accuracy [±%]:
- 3
- Homogeneity [±%]:
- 1 (Position dependent signal change across sensing area).
- Flexprint Length (f) [cm]:
- 5
- Noise Equivalent Heat Flux per area [W/m²] / absolute [μW]:
- 0.02 / 4.6 (Experimentally evaluated values under optimal steady state conditions).
- Linearity with Power [±%]:
- 1
- Max. Compressive Force when clamped [kgf]:
- < 32
- Min./Avg. Sensitivity (S) [µV/(W/m2 )]:
- 35.0 / 65.0 (Only a reference point).
- Response Time (0-95%) [s]:
- 0.7 (Refers to the heat flux measurement).
- Cable Length (c) [cm]:
- 100
- Electrical Resistance [Ohm]:
- < 400